We make and design a collection that we named the Leather Drawer Pull Collection — but these straps and loops are so versatile, there’s so much more to them than just drawers!
Get inspired by some of our customers’ crafty, creative, DIY uses for our leather handles and pulls (hint: this is a great way to use our super-discounted “dents and dings” pulls during our annual AS-IS Sale!)
Level 1: A Perfectly Versatile Leather Strap
The Hawthorne / Fremont
Our first design, the classic and most versatile Hawthorne handle is – at its most basic – a high-quality, super-strong, yet soft, strap with a hole at each end. There’s a lot you can do with that.
Those holes can be used to rivet, nail or screw the handle in just about any way you see fit. It comes with a hardware kit that allows it to go through a hole in any material, which is a self-contained Chicago screw (like a binding post) with its own back screw connection.
The Hawthorne comes in 3 different sizes and 4 colors for craft diversity.
One clever customer on Etsy used the Hawthorne (Wide) to make a DIY towel hanger in her bathroom using an embroidery hoop and a macrame ring:
A visiting artist to our studio once gave us this idea, to use the Fremont loop fold to hold a wall-mounted organizer. We use a wood screw secured straight into a stud for maximum stability. The artist suggested a flower vase, but we’ve used it for all kinds of things!
As it turns out, the Hawthorne Wide / Fremont size is just about perfect for a wide-mouth pint mason jar. (Is there no end to the versatility of the mason jar?!)
This same concept would work equally well in the garage as a holster for a long-handled rake or a shovel.
We used a “dents and dings” Hawthorne Small in our landscaping, to hold a sprawling vine maple back from a trail. The leather is soft enough not to damage the tree or bark, but strong enough to stay secure, even in the outdoors, even after two years in the Pacific Northwest rain!
The Tilikum is set up as a stronger handle, with two layers of leather riveted together. It was originally designed as a heavy drawer pull or full-sized door handle, but that extra strength makes it perfect for use as any kind of DIY handle repair or replacement.
Geoff made Valerie a wood organizer for her essential oil collection, and used the Tilikum Small handle on its sides for lifting. Normally the Tilikum is shown pull outward, but in this application, you can see the upward lift rotates the handle a bit so it looks more like a bin pull. Pretty cool!
The same concept can be applied to adding a handle to any of your favorite objects, such as a canvas log carrier, trunk, suitcase, or even cutting board.
Level 2: Cutting and Riveting
Our leather can be cut to shape using sharp scissors or an exacto blade, and in a pinch, the edges can be finished using a permanent ink pen like a Sharpie. You can also burnish the edges like we do with wax for a smooth edge, and you can punch a hole for your own hardware inserts with a sharp awl, or better yet, a leather hole punch. This is basic leathercrafting, but it can be done with very few tools.
For a big trip to Europe, Valerie got a new suitcase from Seattle maker Tom Bihn, and Geoff outfitted the suitcase with 5/8″ wide leather zipper pulls. The 5/8″ width is the same width as the Burnside handle, but the 3/4″ wide St. Johns tab pull might have done equally well here in this application.
If you’ve never riveted before, then double-cap, or jiffy-set, rivets, are a good place to begin. All you really need is a mallet, although the special rivet setter will ensure the rivet stays centered and flawless.
You can apply the same concept easily to pull-down attic stair handles, ceiling light /fan pull chain, or a dog leash.
Level 3: Custom Work
If you have an idea for a leather project using our hand-dyed, American-made leather, ask us what we can do for you! We can make the straps longer or shorter, wider or skinnier, and place the holes where you need them.
About Walnut Studiolo
Walnut Studiolo crafts original modern designs by hand in our Oregon workshop using only natural materials. We are a family-run company located on the North Oregon Coast. Learn more about us on our website: https://walnutstudiolo.com